We have prepared the following guide to assist you with your electronic file preparation and submission. If you have a specific problem that is not covered in this guide, or have other questions, please feel free to contact us. Improperly prepared files can cause delays in manufacturing.
►All fonts are included.
►Type is legible and crisp.
►Page layout is correct.
►Margins are set.
►Artwork matches the specified dimensions.
►All linked files, images, and fonts are placed in separate folders.
►Colours in CMYK mode.
A 1/8" border must be added to pictures and designs bleeding to the edge, so that there is no white space or border showing around the artwork. It is also important to keep text at least a 1/4" away from the paper edge or the trim line to prevent accidental cropping.
Print previews are not a safe and sure measuring tool for colour accuracy. Colours on the file might be effected by monitor calibration, screen resolution and lighting, just to name a few. Many Pantone colours show a marked colour shift when converted to four colour process.
►All images and pictures should be 300 dpi.
►Rasterized text or logos should be 1200 dpi.
►Screen values should be between 133 lpi and 150 lpi.
Guidelines by Application
We provide PDF files as electronic soft proofs. These digital proofs intend to show you the layout and design elements of your job, but cannot be a guarantee of colour accuracy. If colour accuracy is of extreme importance to you, please ask for a hard copy proof. Scan all transparencies and line art at 100% of final size unless data size is prohibitive. If such a case occurs, scan at 1/4 or 1/2 of final size. Scan all transparencies and line art at 100% of final size unless data size is prohibitive. If such a case occurs, scan at 1/4 or 1/2 of final size.